Brick Paver Installation & Edging



Staging of material

The majority of paver jobs will differ depending on gain access to, site conditions, task size and of course, the weather condition. These situations can have a total impact on your task from a timing stand point. Careful factor to consider should be required to determine the time to begin the paver installation. Constantly attempt to reduce or avoid any traffic on the prepared locations.

The supervisor or project supervisor should always have the products (sand/ pavers) distributed around the job website for easy and effective setups. Paver pallets/bundles ought to be positioned in a manner not to disrupt the paver installation. The correct pallet/bundle placement can make the actual job installation easier and quicker by decreasing the total labor of handling the material.

Brick paver patterns

Pavers can be positioned in many different patterns depending on their shape. Each paver shape will typically have numerous different hatch patterns that are offered by the maker.

Professionals require to take into factor to consider the traffic weight loads on their paver projects. In the majority of applications worldwide, it has been revealed that pavers laid in a herringbone pattern have actually carried out adequately.

Pavers that are 60 mm (2 - 3/8 in) thickness appropriate for pedestrian applications. Pavers that are going to be utilized in commercial or business applications need to be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a number of conditions that identify the starting point of a paver project.

When beginning to set up pavers it is best to snap a real straight chalk line on the surface of the bedding sand or pull a true straight string line above the surface of the bedding sand at the completed elevation of the pavers This will assist as a guide for keeping straight joint lines and will also enable the installer to make modifications in the positioning of the pavers.

Structures and concrete curbing are normally not straight and need to not be used for establishing straight joint lines. The usage of string lines is essential to determine the true straightness of the edge. As the paver installation progresses, the string lines will help minimize the need for small trim pieces.

Joint width between pavers must be in between 1/16 and 3/16 in (2 and 5 mm ). There are some pavers with spacer bars on their sides. These will keep a minimum joint width and permit the bed linen and jointing sand to get in between each paver. Pavers with spacer bars are generally not laid in snug against each other because a string line will offer consistent joint spacing.

Installation of brick pavers.

One of the most widely used methods for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along one of the true straight lines that you have actually pulled or above the bed linen sand. The finest approach is to place a paver against another one and let it slide down into the bedding sand.

When installing pavers on a steep grade, they should be installed at the base of the grade going uphill. This will prevent the pavers from creeping as they are being laid.

On big commercial and commercial applications, hand laying pavers would not be cost effective due to the labor strength. The very best method for setting up pavers on large jobs is to install them mechanically. Using a mechanical laying machine can install around 6000 - 7000 sq ft a day. There are a couple products a professional must consider before installing pavers mechanically:

1.) Mechanical installers are only capable of installing pavers in particular patterns.

2.) The specialist should ensure that the producer is capable of manufacturing and bundling pavers in the wanted pattern on the pallets for simple mechanical installation.

Poor color blending could result in an irregular looking installation. The majority of makers are consistent with color blending on each package of pavers, however it is the professional's obligation to ensure appropriate blending in the field.

Cutting procedures for brick pavers.

Specialists usually have two methods of cutting pavers. Pavers are cut either by 1). A double bladed guillotine or by 2). A gas powered cut off saw or brick saw which is geared up with a diamond blade. The diamond blade cut-off saw or brick saw will offer a much cleaner and more accurate cut. The majority of brick saws will have a pipe attachment on them which will permit the operator to cut the pavers damp. When cutting pavers wet, it will help decrease dust and will lengthen the diamond blades life also. The operator of the brick saw need to constantly cut the pavers away from the surface area of the paver field when cutting wet, due to that the pavers will create a slurry that will stain the paver surface area. Pavers that are cut ought to not fit tight, enough spacing needs to be offered for jointing sand.

The brick saw operator should constantly wear the correct security that is needed for running a saw, such as eye, ear, respiratory and hand defense ).

Edging types

Edge restraints play a significant role in the total success of an interlocking pavement installation Edging restraints eliminate lateral motion of the pavers and hold the pavers firmly together. Especially at the external perimeter of the paver application, without an edging restraint, your task is guaranteed to fail gradually.

There are several various edging restraints from which professionals can pick. Generally manufactured edge restraints are the most typically used by specialists. Manufactured edging restraints can vary from, plastic edging, steel and aluminum, timbers or precast concrete and stone. An edging type that is utilized mainly in business and industrial applications is poured-in-place concrete curbs. This edging restraint is typically installed by other professionals.

Edging installation.

This could result in the migration of the bed linen sand and ultimate lateral movement of the pavers. If there is a possibility of losing bed linen sand in between the pavers and the edge restraint, then geo textile fabric is advised. When a gap between the pavers and the edging goes beyond 3/8" (10mm), then the space ought to be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers have to be compacted. The entire location that is to be compacted ought to be swept tidy of any foreign objects and debris that can trigger scuffing or scratching on the surface of the pavers.

In addition, it is essential that the very Patio Pavers West Palm Beach first compaction takes place before any jointing sand has been used to the pavers. If jointing sand is used to the pavers before compaction takes place, this can cause a bridging issue and will not permit the joints to be completely filled with jointing sand. This can also prevent the pavers from being appropriately set into the bed linen sand.

When compacting the pavers, it is recommended that you make at least 2 passes in various directions across the pavers. This will allow the pavers to be appropriately embeded in the bed linen sand and will require the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is very vital to the final performance of the pavers. Failure to do appropriate compaction can lead to contortions and pavement failure over time.


Paver pallets/bundles should be put in a way not to interfere with the paver installation. One of the most extensively utilized methods for the installation of pavers is hand installation of each paver. The operator of the brick saw must constantly cut the pavers away from the surface area of the paver field when cutting damp, due to the fact that the pavers will create a slurry that will stain the paver surface. Edging restraints get rid of lateral movement of the pavers and hold the pavers firmly together. When a space in between the pavers and the edging goes beyond 3/8" (10mm), then the area should be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *